Blog Posts

  • Linksys Router configuration || Linksys router setup

    Linksys Router configuration || Linksys router setup

    Internet Setup: Now I will show how to Linksys Router configuration. We can use WiFi and Local Area Network with Linksys Router.we will take from ISP( IP, GW, Subnet mask, and DNS) or user name and Password or DHCP system. if ISP is giving us ( IP, GW, Subnet mask and DNS) then we will…

  • How to setup FTP server || Free FTP server

    FTP(File Transfer Protocol): FTP is one kind of protocol. It is a standard Internet protocol for transmitting files between one computer to another computer among the Internet. You can use Windows, Linux but I will discuss windows PC. If you can get a file instant from a specific  address and even if you can store.…

  • VLAN configuration step by step || Configure VLAN

    VLAN configuration step by step || Configure VLAN

    VLAN Concept: The virtual local area network (VLAN) is a group of devices one or more Local Area Network. A Local Area Network (LAN) was primitively defined as a network of computers placed within the equal area. Now, Local Area Networks are specified as a separate broadcast domain. This implies that whenever a user broadcasts…

  • Basic static route configuration

    Basic static route configuration

      Routing is the process of receiving a packet from one device broadcasting it through the network to another device in various networks. Step 1: putting  ip address to the interface: configure Router 1: Router1(config)# interface fastEthernet 0/0 Router1(config-if)#ip add 10.0.0.1  255.0.0.0 Router1(config-if)#no shutdown Router1(config)#int fa 0/1 Router1(config-if)#ip add 40.0.0.1  255.0.0.0 Router1(config-if)#no shutdown   configure…

  • basic Cisco router configuration

    basic Cisco router configuration

    It is a simple Topology for the basic Cisco router configuration. I will show step by step Cisco command mode with video. Access of  CISCO router: =================== 1.Line Consol From RS232 port to Router Console  port 2. Virtually (Line Vty) a.Telnet Starting point : on packet tracer > Router > double click  > CLI mode open…

  • Load balancing on MikroTik

    Load balancing on MikroTik

    Bandwidth Merge or Load Balance with Failover is One of the most generally utilized applications of load balancing is to supply a single Internet service from double services, such as when we take from two ISP internet line 4Mbps+4Mbps=8Mbps than it will be equal 8Mbps. If we do two ISP line merge than we will…

  • GRE over IPsec using MikroTik

    GRE over IPsec using MikroTik

      Mikrotik-1GRE Tunnel and IP Address Configuration: MikroTik1> ip address add address=10.10.10.2/30 interface=ether1 MikroTik1> ip address add address=192.168.1.1/24 interface=ether5 MikroTik1> interface gre add name= gre-tunnel1 local-address=10.10.10.2 remote-address=10.10.10.6 MikroTik1> ip address add address=172.16.1.1/30 interface= gre-tunnel1   Mikrotik-1 Router IPSec VPN Configuration:  MikroTik-1>ip ipsec peer>add address=10.10.10.6/32:500 auth-method=pre-shared-key secret=”password” generate-policy=no exchange-mode=main send-initial-contact=yes nat-traversal=no proposal-check=obey hash-algorithm=sha1 enc-algorithm=3des dh-group=modp1024 lifetime=1d…