Port Forward with Netgear Router

How to setup GNS3 software and work
July 16, 2015
OSPF FINAL
OSPF Configuration Step by Step
September 14, 2015
Show all

We take one IP address from our Internet service provider for internet connection. All computers on the internet necessary  a unique IP address, but we have multiple computers in our house or office and only one real IP address for this reason we need port forward. Mainly, Port forwarding allows Internet pass bundles transmission control protocol(TCP) and User Datagram Protocol(UDP).According to working execution and user (e.g. A router), the packets are sent to. The computer ports by default option transmission control protocol and user Datagram protocol or two additional ports will explicate the concept of For port forwarding for CCTV systems.

A lot of owners of forward-looking CCTV systems prefer to have access to Video recording surveillance recorder (s) during the Internet, from anyplace in the Earth. Whenever the DVR Plugged into the Internet via the router. CCTV assures most advanced digital video recorders have Ethernet The port, allowing users to approach the DVR and cameras are plugged in via a network. In the case of Digital video recorders, CCTV, the two devices plugged in to DVR using a coaxial cable and DVR Web Server gives up the video stream of the cameras to be looked at over a network using sealed varieties of On the customer, such a Web browser on a desktop computer or a laptop computer or a Apps, IPhone or Android cell phone.

Now I will show graphically and practically

default Gateway browse and enter the Netgear page> click port forwarding > custom services > service Name= Black dimond(if any name you can set) > Service Type = TCP/UDP > Starting Port=80 > Ending port =80 > server IP Address=192.168.1.10 ( must be put this IP Address DVR) > Apply > OK