EoIP Configure on MikroTik Router

firewall-1
Firewall Rule create on Mikrotik Router
January 28, 2015
VPN Configuration
February 11, 2015

EoIP Configure on MikroTik Router

Ether over internet protocol (EoIP):EoIP basically create tunneling two router.if you think one office USA and another office Canada but we want to shair data one office to another office then we can create EoIP configure.Ethernet tunnel creates between two Router of branch office.Mikrotik is the best router for EoIP. It is more secure configure and best security of MikroTik router.Because if you can know LAN site password after that you can’t enter LAN site. Actually use for data connectivity.
Branch office ONE( step1 – step4 )
Step1: Interfaces > EoIP Tunnel + Remote address= Real IP of other end( such as 202.191.122.27) and Tunnel ID=400(N.B: same tunnel ID will be put other end).>Apply > OK
 Bridge create :
Step2: At first click  Bridge + then general name select ( any name) > Apply > OK
Step3:  At first click  Interfaces > ports + General >click  interface then select > EoIP tunnel 1 > Apply >OK
Step4: At first click Interfaces >click  ports + General > interface select( ether5 LAN. must be LAN) > Apply > OK
Branch office TWO other end (step1-step2 )
Step1: Interfaces > EoIP Tunnel + Remote address= Real IP of other end( such as 202.191.121.200) and Tunnel ID=400(N.B: same tunnel ID will be put other end).>Apply > OK
Step2: At first click  Bridge + then general name select ( any name) > Apply > OK
Step3:  At first select Interfaces >click  ports + General click interface select> EoIP tunnel 1 > Apply >OK
 
Step4: At first Interfaces > ports + General > interface select( ether5 LAN. must be LAN) > Apply > OK
 Same IP address put the LAN Site such as 192.168.10.2/24 ( Branch  ONE and Branch TWO)